TorqueMaster serviced safely
Wayne Dalton garage door repair in Ottawa, TorqueMaster specialists
Wayne Dalton door that will not lift, or a TorqueMaster spring failed inside the shaft? HUSH services Wayne Dalton doors safely, same day, and can convert to a standard torsion system for easier future repairs.
Do you repair Wayne Dalton garage doors in Ottawa?
Yes. We service Wayne Dalton doors, including the TorqueMaster spring system built inside the shaft. We repair springs, cables, rollers and panels, and we can convert a TorqueMaster door to a standard torsion system for easier future repairs.
Wayne Dalton is a little different from other brands because of TorqueMaster, so it pays to have a technician who knows it. Whatever your Wayne Dalton door is doing, you can book a same-day repair, or see the full garage door repair service in Ottawa.
What is a Wayne Dalton TorqueMaster spring?
TorqueMaster is Wayne Dalton's counterbalance design that encloses the spring inside the torsion tube, rather than exposed on a shaft. It looks tidy, but the enclosed spring and end winders make a failed TorqueMaster harder to diagnose and source than a standard spring.
Because the spring is hidden inside the tube, a broken TorqueMaster often shows only as a door that will not lift, with no obvious gap to see. We open it up, confirm the failure, and replace the spring or convert the system. For the parts picture, see Wayne Dalton and Steel-Craft parts: repair or replace, and how it compares to a normal system in torsion vs extension springs.
Should I convert my TorqueMaster to standard torsion?
Often yes. When a TorqueMaster spring fails, converting to a standard exposed torsion system gives you parts that are easier and cheaper to source in future, with the same smooth balance. We will quote both options and let you choose.
A standard torsion conversion uses common springs we carry on the truck, so the next repair is faster and cheaper, and you can add a high-cycle spring if the door runs many times a day. There is no pressure either way, we will repair the TorqueMaster if that is what you prefer.
How much does Wayne Dalton garage door repair cost in Ottawa?
A standard torsion spring or conversion starts from $200, with the service call free on a repair over $250. A TorqueMaster spring replacement can cost a little more because of the enclosed design, and we quote it before any work.
We quote the full price before we start, with no overtime fees. See garage door repair costs in Ottawa for the wider breakdown.
Spring repair and conversion specs and price
| Standard torsion spring | 10,000 cycles, about 7 years at 4 open-and-close a day |
| High-cycle upgrade | 20,000 / 25,000 / 50,000 cycles, lasts 2 to 5 times longer |
| Wire size | 0.207 in to 0.250 in, oil-tempered or galvanized |
| Inside diameter | 1¾ in or 2 in, matched to the door |
| Lifting force (torsion) | 300 to 350 lb on a wound spring |
| Replaced in | matched pairs on a two-spring door |
| Price | from $200 single, from $300 pair, installed |
A standard-torsion conversion uses the common springs below, sized to your door, which is why the next repair is cheaper and faster than another TorqueMaster.
Should you repair or replace your Wayne Dalton door?
Repair if the door is sound and only a part failed. Replace when panels are dented or rotted or the door is past 15 to 20 years. A failed spring on a good Wayne Dalton door is a repair, or a smart moment to convert to standard torsion.
Compare the trade-off in our repair or replace decision guide, or see garage door replacement. Every Wayne Dalton repair is backed by our 90-day Done-Right guarantee.
- Authorized Garaga Dealer
- Licensed and insured
Same-day service
We carry the common springs, cables, rollers and opener parts on every truck, so most repairs are one visit.
Honest, upfront pricing
You get a firm price, quoted before we start, never after, with no overtime fees and no surprises.
Guaranteed work
Every repair is backed by our written 90-day Done-Right Promise, parts and labour included.
Experienced and accredited
factory-trained, owner-operated, an Authorized Garaga Dealer and LiftMaster Pro.
Free estimate, and the service call is free with any repair over $250. Ask about financing from $89/mo.
From call to fixed, in 4 steps
-
Call or book
Tell us what is happening. We give you a real arrival window.
-
We diagnose on-site
A technician inspects and shows you exactly what is wrong.
-
You get a firm quote
We price the fix and walk you through your options, before any work.
-
We fix it, you test it
Most repairs done the same visit, backed by our 90-day promise.
Helpful garage door guides
Free, no-pressure guides written by our factory-trained technicians. Read up, then call when you want it done right.
Wayne Dalton and Steel-Craft parts
TorqueMaster, conversions, and which parts to repair vs replace.
Read the guideTorsion vs extension springs
How a standard torsion system counterbalances the door.
Read the guideWhy DIY spring repair is dangerous
TorqueMaster and torsion springs both hold high tension, here is why it is not a DIY job.
Read the guideHow long garage door springs last
Cycle ratings and when a high-cycle conversion pays off.
Read the guideOur 90-day Done-Right Promise
If your repair is not working the way it should, call us and we will make it right, no extra charge. Premium parts carry a bounded limited-lifetime warranty.
We can promise this because most of our repairs are done right on the first visit, so callbacks are rare. On the rare one, fixing it is on us, never you.
Wayne Dalton or TorqueMaster trouble? We know it.
Same-day Wayne Dalton garage door repair and TorqueMaster conversions across Ottawa and Gatineau.
Same-day, 7 days a week, with a 24/7 emergency line